Contractor Development & Training
Contractor Development Division (BPK)
BPK's Mission
Design, analyze and develop contractors by applying knowledge and expertise in producing contractors who are competitive and have the potential to reach international standards.
BPK's Vision
As a pillar in efforts to improve the image of the Malaysian construction industry through the development of contractor capacity and capability in line with CIDB's function towards producing high-prestige contractors.
Objectives of BPK
- 1. Increased Capability
Drafting, planning and implementing programs related to improving the contractor's capacity from the aspects of productivity, technology and quality. - 2. Continuous Learning
Applying the knowledge and expertise of contractors based on current technological developments. - 3. Advisory Service
Provide advisory services to contractors in developing high performing and competent companies. - 4. Cooperation And Involvement
Collaborate with government agencies to produce more competent contractors. - 5. Entrepreneur Program
Providing programs related to construction entrepreneurs to produce young entrepreneurs/contractors
Contractor Management Course (SKP)
Introduction
The Contractor Management Training Program was developed under the CIDB Contractor Competency Development program initiative and aims to improve the competence and skills of contractors in the Malaysian construction industry. In connection with that, this program also encourages contractors and their staff to continue to improve their knowledge and competence in the field they want to venture into.
This course is implemented by the Contractor's Certified Training Center (PLBK) which is registered with CIDB.Â
Programme's Objective
The objective of this program is to improve the knowledge and skills of contractors in implementing projects according to certain trades / expertise.Â
Participants who pass the assessment will be awarded a Contractor Management Competency Certificate (SKP) and further qualify them for:Â
- i. Add specification in the Contractor's Registration CertificateÂ
- ii. Bid on projects related to empowermentÂ
- iii. Get points Continuous Contractor Development (CCD)
List of Modules Offered
| NO | CODE | TITLE |
|---|---|---|
| 1 | KK-T-001 | MASONRY WORKS BRICK LAYING & PLACING |
| 2 | KK-T-002 | TILING |
| 3 | KK-T-003 | BENDING IRON |
| 4 | KK-T-004 | PLUMBING - BUILDING & SANITARY, WATER RETICULATION |
| 5 | KK-T-005 | PIPING - SEWERAGE |
| 6 | KK-T-006 | CEILING & PLASTERBOARD INSTALLATION |
| 7 | KK-T-007 | INSTALLATION - DRYWALL & BLOCK WALLS |
| 8 | KK-T-008 | STEEL STRUCTURE INSTALLATION |
| 9 | KK-T-009 | IRON & METALWORKING |
| 10 | KK-T-010 | INSTALLATION OF WATERPROOF PROTECTION COATING & CONCRETE REPAIR |
| 11 | KK-T-011 | IBS - PRECAST CONCRETE PANEL |
| 12 | KK-T-011(A) | IBS - PRECAST COLUMN & BEAM (A) |
| 13 | KK-T-012 | SYSTEM CONSTRUCTION, SURFACE DRAINAGE & UNDERGROUND DRAINAGE |
| 14 | KK-T-013 | LANDSCAPE CONSTRUCTION & PLAYGROUND CONSTRUCTION |
| 15 | KK-T-014 | PAVEMENT CONSTRUCTION & HARDSTAND CONSTRUCTION |
| 16 | KK-T-015 | BRIDGE |
| 17 | KK-T-016 | MARINE STRUCTURES |
| 18 | KK-T-017 | WATER SUPPLY SYSTEM |
| 19 | KK-T-018 | SEWAGE SYSTEM |
| 20 | KK-T-019 | SLOPE PROTECTION SYSTEM |
| 21 | KK-T-020 | INVESTIGATION WORK & LAND STABILIZATION |
| 22 | KK-T-021 | LAND WORK |
| 23 | KK-T-022 | ROAD WORK |
| 24 | KK-T-023 | AIR CONDITIONING & AIR DISTRIBUTION SYSTEMS |
| 25 | KK-T-024 | BUILDING AUTOMATION SYSTEM |
| 26 | KK-T-025 | FIRE PREVENTION & PROTECTION SYSTEM |
| 27 | KK-T-026 | BUILDING SECURITY SYSTEMS |
| 28 | KK-T-027 | CONCRETE REPAIR WORK |
| 29 | KK-T-028 | PILE WORK |
| 30 | KK-T-029 | GLASSWORK |
| 31 | KK-T-030 | ROOF WORK |
| 32 | KK-T-031 | BUILDING WORK - HOUSING |
| 33 | KK-T-032 | BUILDING WORK - EDUCATIONAL INSTITUTIONS |
| 34 | KK-T-033 | BUILDING WORK - HOSPITAL |
| 35 | KK-T-034 | BUILDING WORK - BUSINESS |
| 36 | KK-T-035 | CONSTRUCTION WORK - INDUSTRY |
| 37 | KK-T-036(1) | BUILDING WORK - RENOVATION (5 DAYS) |
| KK-T-036(2) | BUILDING WORK - RENOVATION (2 DAYS) | |
| 38 | KK-T-037 | BUILDING WORK - BUILDING MAINTENANCE & ENVIRONMENT |
| 39 | KK-T-038 | PAINT WORK |
| 40 | KK-T-039 | METAL ROOF & CLADDING INSTALLATION |
| 41 | KK-T-040 | INSTALLATION OF DIRECTION BOARDS |
| 42 | KK-T-041 | INTERIOR DECORATION |
| 43 | KK-T-042 | FLOOD CONTROL |
| 44 | KK-T-043 | ELEVATORS & ESCALATORS |
| 45 | KK-T-044 | SOUND SYSTEM |
| 46 | KK-T-045 | IBS - BLOCK SYSTEM |
| 47 | KK-T-046 | IBS - FORMWORK SYSTEM |
| 48 | KK-T-047 | DEMOLITION WORK |
| 49 | KK-T-048 | FACILITY MANAGEMENT |
Training MODE
- i. This Technical Management Training is carried out for 5 consecutive days and is carried out for 8 hours a day.
- i. Participants are required to attend the training before sitting the assessment. Training will be conducted by CIDB together with/through the appointed Certified Training Center (PLB). The training period is five (5) days of which four (4) days are theoretical training that includes learning all nine (9) training packages and one (1) day of evaluation exams
- iii. PAS Performance Assessment and KAS Knowledge Assessment.
Assessment
At the end of the course, participants will sit an assessment test to test the level of understanding and knowledge of the participants related to the course known as Knowledge Assessment (KAS) and Performance Assessment (PAS). Test questions will be prepared by CIDB.
Assessment will be carried out based on knowledge (KAS) and performance (PAS) to course participants, as set by CIDB.
The evaluation criteria are divided into two (2) elements, as follows:
- a) The first part of the performance assessment (PAS) – assessment in the form of application/simulation This assessment can be given individually or in groups. Candidates will be asked to answer by providing suggestions or solutions to a case study situation. Estimated evaluation time is five (5) hours.
- b) The second part of knowledge (KAS) – individual assessment. Candidates will be asked to answer fifty (50) questions covering all nine (9) Training Packages (PL). The evaluation time is three (3) hours.
Each KAS and PAS component must test the participant's competency based on each PL found in the module as follows:
Technical Modules – PL01, PL02, PL03, PL04, PL05, PL06, PL07, PL08 and PL09
Scoring Criteria
In order to determine if the participant is eligible to receive a certificate, the participant must sit for KAS and PAS and PASS the assessment with a passing score of 70%.
| Assessment | Full Mark | Minimum Marks |
|---|---|---|
| KAS | 60 | 42 |
| PAS | 40 | 28 |
| TOTAL | 100 | 70 |
Program For Industry
